Comprehensive interpretation of silicone fluid bill of lading knowledge

A comprehensive interpretation of silicone fluid bill of lading knowledge.

Waterborne silicone is a commonly used natural rubber, and there are two common components of hydrogen containing silicone rubber when cured at room temperature.

Condensed silicone, due to its excellent functionality, can protect almost all fields when used together with traditional silicone rubber. Here are some common operating methods for everyone to choose from.

Condensed silicone is a common type of condensed silicone, and there are two types of awareness when curing at room temperature to meet the required physical or chemical requirements. The condensed silicone undergoes strict control at room temperature of -40~200 ° C, and after curing, it presents a flexible rubber elastomer.

The commonly used Bok rubber and plastic materials, as well as organic silicon materials, are considered materials that are cured at room temperature. The result is that the stability of material properties can also be maintained at low temperatures.

Elastomer based polymers (TP) refer to materials containing Si-C bonds and at least one organic group. TP-8 nano coagulant accelerator is a kind of paste elastomer containing active substances such as polydimethylsiloxane, which has excellent spreading, permeability, stability, emulsification and emulsification. It is plastically dissolved in styrene acrylic lotion, replacing dimethylsiloxane, which is the polymer formed from it.

Many of the fixing agents of Bok Color Fixer have some colors and odors, such as some have smooth surfaces, some have a yellow tone, and some are environmentally friendly.

It is recommended that customers take a sample before use, as it is not important to transfer it to the maximum allowable value. This is because it is not important for customers to peel off this fixing agent again. Therefore, the stronger the ratio between the fixing agent and the toner, and the higher the concentration value of this material during dyeing, the better the fixing effect and stability of the fixing agent. However, the correctness of the operation method will be seriously affected, Evaluation of the use of silicone oil.

In addition to fixing agents, everyone should know that there are many types of fixing agents used in dye machines, and there are also many types of fixing agents. The loose material covering the wattage is one, and the fixing agent covering the wattage is not enough to dissolve on this material, so it is necessary to completely separate it during finishing. The further increase in salt content, such as the flocculation effect of soap solution, can make the molecular chains of the fixing agent closely contact, allowing the fixing agent to penetrate into the interior of the fiber, thereby removing the dye on the surface of the fabric and avoiding dyeing of the material. However, excessive dye solubility and inappropriate amount of slightly yellow oil can easily cause color stains, which not only affect dispersion but also may be harmful to human health. I suggest everyone take a look. Often, with the use of these dyes, the higher the permeability of chemicals such as oils, the better the fixation effect.